If you are thinking about buying some emerald-cut engagement rings then you have come to the right place. This guide will tell you everything you need to know about them, so you can make great choices going forward with your selection of jewelry.
Cut
The first thing you need to do is look at the cut of the diamond of your choosing. Ideally, you should be going for an excellent cut, or at least very good. When you have found a diamond that fits this criterion, you can then take a look at some of the other areas, so you can make sure that you are getting the best of the best.
Symmetry
When you look at an emerald-cut ring, you will soon see that it is made up of parallel lines, a very distinct style that many people are attracted to. Symmetry is so important, especially when it comes to diamond rings. You do not want a stone that looks wonky. Like the cut of a stone, symmetry is graded from excellent to poor, so make sure that you choose a diamond that is at the better end of the scale. If you don’t then your ring will never look as good as it could. If you want to buy some diamonds then check out Best Brilliance Ring Collection as a good starting point – (https://bestbrilliance.com/collections/emerald-shape-stone-ring).
Girdle Thickness
Thin girdles tend to be highly desirable but when you look at a ring that is emerald cut, you will soon see that you have an increased risk of cracking here. You may even find that you are at risk of experiencing chips if you opt for a thin girdle as well. Your best bet would be for you to find a girdle width that is in the safe zone. This would be a ring that has a ratio of medium to slightly thicker.
Length to Width Ratio
The emerald of your choice may be slightly rectangular but at the end of the day, it is still possible for this to vary. Some rings can be longer and thicker but others can be short and wide. A lot of people like to go for the classic look and this has a ratio between 1:3 and 1:4. If you do want to go for a ring that is long and thin or if you have short fingers that you want to appear longer then opting for a ratio up to 1:75 could be an option.
Table and Depth Percentage
When you compare emerald-cut diamonds with ones that are diamond-cut- you will soon see that emerald-cut diamonds look better with a bigger table. This opens up the stone quite a lot and it gives you that traditional hall of mirrors impact. Of course, if you want to make sure that you get your ring on a budget then you would be sacrificing the quality of the ring if you went for a diamond that has a percentage less than 65%. For this reason, you need to make sure that you are willing to spend the extra so you can get the look you want.
Size
As a general rule, the bigger diamond you go for, the more expensive your ring will be. If you want to make sure that you are choosing a ring that is perfect then you may want to buy the diamond and then get it made into a ring. This gives you more control over the setting and it allows you to customise the metal as well so make sure you keep that in mind. Of course, getting your ring customised will cost you a lot more, as you will have to pay to get it made according to your requirements. That being said, it’s a great way for you to get the exact look you are going for. If you are buying a ring that has already been made then pay special attention to the size of the diamond and the grading. If you can do this then you will soon find that it is easier than ever for you to make sure that you’re getting a ring you can be proud of.
