If you have a wet basement, it will, therefore, lead to pervasive and unpleasant odors, structural problems and health-threatening mold. In case you want to sell the house, it will discourage the customers willing to buy.
On the other hand, you need a properly installed sump pump that will help in capturing the basement water and remove it from the house efficiently.
While installing an emergency sump pump, it should include the correct pump, capacity, basin installation, connection of discharge pipes, and many more factors.
Here are the tips to consider for an emergency sump pipe:
- Sump Pump Selection
It depends on the type of pump because each has been designed such that it can handle a specific volume of water. So, having the correct pump will increase the durability of the pump because you don’t have to overwork it.
If you want to know the capacity of the basin to guide you in buying a sump pump, get the length, and see the inches of water that flows inside the basin during the heavy rains.
In case you haven’t installed the basin, you can click here determine the system capacity needed depending on the capacity required.
- Installation Of The Basin
It is essential to install a basin or pit. It is the place that will catch and hold your sump pump. When you select the type and size of the basin, it will depend on the anticipated capacity and use.
In case you want to use a sump liner, it will handle groundwater where the perforations will allow water you are collecting to enter freely.
The process of basin installation will need you to break the concrete floor for your pit and pipe connections. So, you have to excavate to get the correct depth and ensure the hole you dig is leveled.
- Sump Pump Placement
You have to connect your discharge pipe with the correct length. Ensure that there is a section of the discharge pipe extending up to the top of the basin. So, that you can prevent air locking in your system, you will drill a weep hole inside your discharge pipe some inches above its outlet.
The last step will be setting your sump pump in that basin and ensure its leveled and firmly resting.
- Directing The Water
So that you can effectively get rid of the water in your house or building, the sump pump will have a pipe of adequate distance where it will direct it’s water.
When you need to prevent water flowing back, you need to install a check valve.
Moreover, you should also direct the sump pump discharge lines through the drilled hole. You start by drilling the small hole outside so that it acts as a guide before drilling a large hole that can accommodate your discharge pipe.
The electricity is another consideration you don’t have to eliminate. You have to know that sump pumps will need a high amp load where they have an electrical circuit.
You will, therefore, have to pick the correct sump pump considering the electricity. You can also consider the manufacturer’s recommendations before using the sump pump.