5 Key Mistakes To Avoid When Doing Water Transfer Printing

Water transfer printing, or hydro-graphics, is a process that can be used to apply designs to a variety of substrates. It is often used on firearms but can also be used on other objects, such as cars and motorcycles. It would help if you kept in mind many things when doing water transfer printing to avoid making common mistakes.

1- Not Prepping the Surface Properly

One of the most common mistakes people make when water transfer printing is not properly prepping the surface. If you do not prep the surface, the design will not adhere properly, and it will eventually peel off. You need to make sure that you sand the surface and remove any oils or debris before starting the hydro-graphics process.

If you do not prep the surface properly, you will end up with a design that does not adhere properly and eventually peels off. To avoid this, make sure to sand the surface and remove any oils or debris before starting the hydro-graphics process.

Furthermore, if you are working with a three-dimensional object, you need to ensure that all of the nooks and crannies are appropriately prepped. If there is any debris in these areas, it will prevent the design from adhering correctly.

2- Not Using the Right Activator

The activator is what will cause the design to adhere to the surface. If you do not use the excellent activator, the design will not adhere properly, eventually peeling off. There are many different types of activators on the market, so make sure you do your research and find the right one for the substrate you are using.

If you don’t use a suitable activator, your design will not adhere properly and eventually peel off. Do your research to find the proper activator for the substrate you’re using.

3- Not Using the Right Temperature

The temperature of the water will affect how well the design adheres to the surface. If you do not use the right temperature, the design will not adhere properly, eventually peeling off.

Make sure you check the manufacturer’s recommendations for the ideal water temperature. In addition, the temperature of the room you are working in will also affect the process. If it is too cold, the design will not adhere properly.

4 -Not Following the Recommended Cure Time

One final mistake people make is not following the recommended cure time. The cure time is the amount of time you need to let the design sit before using the item.

If you do not follow the recommended cure time, the design will not adhere properly, eventually peeling off. Make sure you follow the manufacturer’s recommendations for the ideal cure time.

Transfer printing is a great way to add designs to various substrates. However, there are a few things you need to keep in mind to avoid common mistakes.

Make sure to prep the surface properly, use the right activator, use the right temperature, and follow the recommended cure time. Doing so will ensure that your design adheres appropriately and does not peel off.

Share on:

Leave a Comment